DZS30-450 Motor vibration conveyor
The DZS30-450 motor vibration conveyor uses the vibration of the trough to quickly transfer the materials in the trough from the inlet to the outlet. It is suitable for uniformly and continuously feeding block, granular and powdery materials from the storage bin or hopper to the receiving device. The discharge port can be straight, side-inclined or down-bent .
DZS30-450 motor vibration conveyor has the advantages of simple structure, light weight, low noise, reliable work, no dust pollution, and convenient installation and maintenance.
1. Large amount of transportation and low power consumption;
2. Start, stop quickly, stable operation, good vibration isolation performance, low noise;
3. The structure is simple, easy to debug, less variety of wearing parts, easy to maintain;
4. Can be more points into, unloading, suitable for cement clinker and slag reservoir bottom, storage top;
5. Can be fully enclosed transport, eliminate dust pollution, but also open transport;
DZS30-450 motor vibration conveyor has two types: open vibration conveyor and closed vibration conveyor. The cross section of the trough can be made into various types such as round, rectangular and trapezoid.
DZS30-450 motor vibration conveyor, the material tank is supported by rubber springs or steel springs, relying on the self-synchronized operation of two vibration motors fixed on the material tank, so that the material tank generates linear vibration.
DZS30-450 motor vibration conveyor has the characteristics of simple structure, light weight, low noise, reliable work, etc. Widely used in the metallurgical, mining, coal, building materials, chemical, food, glass, ceramics and other industries for the transportation of various small, granular and powdery materials in the short distance..
|Model||Productivity（t/h）||Conveying distance（mm）||Vibration frequency（r/min）||Amplitude||Voltage（v）||Power（kw）||Weight（kg）|
Installation and use:
1. It can be installed horizontally, or it can be installed within the range of 0 ～ －12 ° according to requirements ("-" sign indicates that the discharge end is down).
2. The connection between the vibration motor and the conveying trough should be firm.
3. Before starting, check whether the included angle between the adjustable eccentric block and the fixed eccentric block of the two vibration motors is consistent.
4. Trial start and observe whether the two vibration motors are turning in opposite directions. If it is not, the two two-phase wiring of any vibration motor should be replaced.
5. After the machine is turned on, observe that the body must not have lateral swing, the motor current must meet the requirements, and the machine has no abnormal sound.
DZS motor vibration conveyor can be made according to the user's lightning: lower vibration type, upper vibration type, speed regulation type, open type, sealed type, seat type structure.